Q: How quickly can an emergency heating engineer attend in Dagenham (RM10)?

Because our dispatch base is located at 123 Frizlands Lane, Dagenham (RM10 7HL), our average emergency response time for complete heating breakdowns, frozen pipes, or gas leak suspicions in Dagenham, Barking (IG11), and Romford (RM1) is between 30 and 45 minutes. You can call engineer Syed Ather directly on 07712 474668 for emergency dispatch.

Q: How can I verify your Gas Safe accreditation?

You can verify our credentials at any time directly on the official UK Gas Safe Register website (gassaferegister.co.uk) by searching our registration number 975971 or our lead engineer's name, Syed Ather Hamad Mehmood (Gas Safe ID Card: 5981118). Ather carries his physical photo ID card to every appointment, which you can inspect upon arrival.

Q: What is the difference between a £65 CP12 and the £99 Service & CP12 Combo?

A standalone Landlord Gas Safety Certificate (£65) is a statutory compliance safety check. Our £99 Dual Combo includes both the full legal CP12 certificate PLUS a comprehensive annual boiler service — stripping the combustion chamber, cleaning the spark electrodes and condensate siphon, checking the flue gas combustion ratios with a calibrated Testo analyser, and testing heat exchanger efficiency. This maintains your manufacturer warranty while fulfilling legal landlord obligations in one visit.

Question 1

How much does a new boiler installation cost in Dagenham & East London?

Accepted Answer

A like-for-like combi boiler replacement typically ranges between £1,750 and £2,300, depending on the model chosen (e.g. Vaillant ecoTEC or Worcester Bosch Greenstar). A system-to-combi conversion (removing cold water loft tanks and hot water cylinder) typically costs £2,400 to £3,200. Every installation by Reliant includes a digital power flush, a magnetic system filter (Magnaclean), wireless programmable smart controls, and up to a 10-year manufacturer warranty. We provide guaranteed fixed-price quotes before any work commences.

Question 2

What is legally required during a Landlord Gas Safety Inspection (CP12)?

Accepted Answer

Under Regulation 36 of the Gas Safety (Installation and Use) Regulations 1998, UK landlords must have all gas appliances, pipework, and flues inspected annually by a Gas Safe registered engineer. Our inspection (only £65) includes: gas meter tightness testing to detect micro-leaks, burner pressure and gas rate checks, flame failure device (FFD) verification, flue flow and spillage testing with a digital combustion analyser, and visual inspection of stability brackets. Digital CP12 certificates are issued immediately via email upon completion.

Question 3

Why is my boiler losing pressure and dropping below 1.0 bar?

Accepted Answer

A boiler dropping pressure is usually caused by either: (1) A micro-leak in central heating pipework, radiator thermostatic valves (TRVs), or solder joints; (2) A depleted expansion vessel diaphragm, which causes system pressure to spike above 3.0 bar during heating and discharge water outside through the Pressure Relief Valve (PRV); or (3) A weeping heat exchanger. If you have to top up your boiler via the filling loop more than once a month, you require a Gas Safe engineer to diagnose the hydraulic integrity.

Question 4

Can I install air conditioning in a domestic London terraced home or flat?

Accepted Answer

Yes. Modern single-split and multi-split air conditioning systems are fully compliant with UK Permitted Development rights for domestic dwellings, provided the outdoor condenser unit meets local council sound pressure guidelines (<42 dB(A) at 1 metre). Our units function as high-efficiency air-to-air heat pumps with a Coefficient of Performance (COP) greater than 3.8 — providing both rapid summer cooling and highly economical winter heating.

Question 5

How quickly can an emergency heating engineer attend in Dagenham (RM10)?

Accepted Answer

Because our dispatch base is located at 123 Frizlands Lane, Dagenham (RM10 7HL), our average emergency response time for complete heating breakdowns, frozen pipes, or gas leak suspicions in Dagenham, Barking (IG11), and Romford (RM1) is between 30 and 45 minutes. You can call engineer Syed Ather directly on 07712 474668 for emergency dispatch.

Question 6

How can I verify your Gas Safe accreditation?

Accepted Answer

You can verify our credentials at any time directly on the official UK Gas Safe Register website (gassaferegister.co.uk) by searching our registration number 975971 or our lead engineer's name, Syed Ather Hamad Mehmood (Gas Safe ID Card: 5981118). Ather carries his physical photo ID card to every appointment, which you can inspect upon arrival.

Question 7

What is the difference between a £65 CP12 and the £99 Service & CP12 Combo?

Accepted Answer

A standalone Landlord Gas Safety Certificate (£65) is a statutory compliance safety check. Our £99 Dual Combo includes both the full legal CP12 certificate PLUS a comprehensive annual boiler service — stripping the combustion chamber, cleaning the spark electrodes and condensate siphon, checking the flue gas combustion ratios with a calibrated Testo analyser, and testing heat exchanger efficiency. This maintains your manufacturer warranty while fulfilling legal landlord obligations in one visit.

Landlord Gas Safety Certificates (CP12) from £65

Straightforward Landlord Pricing

Landlord CP12 Certificate

CP12 + Full Boiler Service

Landlord Gas Safety FAQs

Is a Landlord Gas Safety Certificate (CP12) legally required in the UK?

How quickly is the CP12 certificate issued?

What is included in the £99 Service & CP12 Combo?

Book Your Landlord Gas Safety Inspection Today